It is cheaper in a set!
| Price of a product sold separately: | Set price | ||
|---|---|---|---|
 | Piston complete ø41.25 ALMET + bolt for Simson S51 S53 SR50 KR51 / 2 Schwalbe | 130.62zł | 129.30złYou save (1.01%) |
The article is made by Almet (not Almot).
Almet pistons have the same quality as a Megu piston ( Simson DDR piston at that time). Original K20 material mix
Type of fuse: with internal fuse (Pin sits in the middle of the piston ring groove)
Installation advice: The arrow on the piston crown must point in the direction of the muffler!
The surfaces of the thrust washers are ground flat. Suitable for thrust washers 1 mm
Item is a quality product (EU production)
Dimensions:
The grinding dimension is given, the piston is correspondingly a few 3/100 mm smaller.
Piston: ø41.23 mm
Grinding dimension: ø41.25 mm
1. Oversize 60ccm (S61)
Scope of delivery:
1 x piston
Users reviews
Tech specs:
| Suitable for vehicle type: | Simson S50, S51, S70 ,
Simson SR50 ,
Simson KR51/2 Schwalbe ,
Simson S53 |
| Approved for road use: | Änderungsabnahme erforderlich |
| Condition: | New (newly manufactured based on the original template) |
| Gewicht | 67 Gramm |
Polecane
Piston ø38.25 ALMET similar to Megu 1st quality for Simson S51 SR50 KR51 / 2 Schwalbe
Piston complete ø41.25 ALMET + bolt for Simson S51 S53 SR50 KR51 / 2 Schwalbe129,30 zł
2x wire snap ring safety clips ø12mm for piston for Simson S51 SR50 KR51 SR4-
Piston ø41.00 ALMET similar to Megu 1st quality for Simson S51 SR50 KR51 / 2 Schwalbe
Piston pin length 32mm ø12mm for Simson S50 S51 SR50 KR51 (60ccm)9,92 zł10,43 zł
Piston ø39.50 ALMET similar to Megu 1st quality for Simson S51 SR50 KR51 / 2 Schwalbe84,97 zł
Piston ø39.00 ALMET similar to Megu 1st quality for Simson S51 SR50 KR51 / 2 Schwalbe106,26 zł
This product is available in our stores
You can buy this product without placing an online order at one of our stores in your area. Check where the product is in stock.
Check availability